Jan 22, 2025 · MDIO on GPIOs In some cases, due to the limited resources allocated by imx pins, gpio has to be used as mdio/mdc. This article is a simple guide on how to use MDIO on GPIOs. …

Mar 13, 2025 · Hi guys, I’ve got this AP given from a friend and I’d like to configure it into my house, but it’s got no firmware. I looked up info on internet and, in order to configure it in …

Mar 21, 2025 · We are using a custom board with the i.MX93 which uses the ENET-QOS ethernet interface running on kernel 6.6.52. In principle it works well but now we want to reduce the …

Apr 23, 2025 · I could find that the reset signal is deasserted before the read activity on MDIO. I had checked the ECR register and confirmed that the ENET reset is also asserted and …

Dec 5, 2024 · Hi I would like a confirmation of the LS1046 external MDIO max frequency. Some document seem to reference a max frequency to 2.5MHz. (That seem like a typo) Others …

Aug 20, 2024 · Hi NXP Team, I can't use https://github.com/wkz/mdio-tools in LSDK20.04 on LS1046A。 I have tried versions 1.1 to 1.3, and the result is the same. Can you help me ...

Dec 9, 2024 · Hi @Zhiming_Liu, Thanks for your support but the link you shared was what I'd tested before and MDIO bitbang is about using generic GPIOs as MDC/MDIO with the software …

Nov 1, 2023 · When I inserted number of logs, I found mdio_register I debug up to where it was called --> list_for_each(entry, &mii_devs) { And I realized, it doesn't enter to list_for_each and I …

May 12, 2025 · Since the iMX93 has two different Ethernet interfaces, with two MDIO and MDC lines, can I use the same PHY address on two different Ethernet PHY (for example 0x0 on both …

Aug 5, 2024 · 现象:设备树只开启一个网口节点是单独使用正常的,但是同时开启两个的话,phy id可以读到,但是两个网口都不能用.这两个phy是同一路MDIO总线,phy地址一个0一个1,MDIO 总线添加 …